SMT PC3.3 Straight Pin Connector 2.54mm Gold Plated Ejector Type

SMT PC3.3 Straight Pin Connector 2.54mm Gold Plated Ejector Type

• Horn connector "Horn connector" is a type of plastic connector with two ear buckles, similar to the two horns of a cow.

  This connector is widely used in electronic, electrical, instrument in the PCB circuit board, its role is in the circuit is blocked or isolated between the circuit, play a bridge function, take up the task of current or signal transmission.

  Usually used with the busbar form a board-to-board connection; Or with the electronic wiring harness terminal matching the use of the board pair wire connection.

  "Horns come in a variety of sizes as different products require different sizes."

• High temperature resistant insulating plastic (UL94V-0) material: PBT(only meet the wave soldering process).

  High temperature resistant insulating plastic (UL94V-0) material: PA6T, PA9T, LCP(can meet the wave soldering, reflow welding two kinds of process).

  The color of insulating plastic can be divided into black, white, blue, natural color and so on.

  Policy material: Brass (H65)

  Hardware plug contact terminal surface treatment: first plated with nickel in gold or silver, bright tin, wuxi, semi-gold tin etc.

• SPECIFICATIONS >>>

  Current Rating:1.0Amps

  Withstanding Voltage:AC 500Vmin/Minute

  Insulation Resistance:1000MΩ Min

  Contact Resistance:20 mΩ MAX

  Operation Temperature:-40℃to+105℃

  Material>>>

  Plastic material:PA6T/PA9T/LCP+30%G.F

  Color:Black,White,blue,Special

  Insrlator Material:Polyester(UL94V-0)

  Contact Material:Brass

  Contact Plating:Au Or Sn over 40u" Ni

  Max.Processing Temp: 230°C for 30-60 seconds

  (260°C for 10 seconds)

PC3.3 Straight Pin Connector

Ejector Straight Pin Connector

2.54mm straight pin header

SMT PC3.3 Straight Pin Connector 2.54mm Gold Plated Ejector Type Images